Processing capabilities based on 50,000-psi minimum yield strength

For yield strengths great than 50,000-psi, please inquire

ATTRIBUTE		CLEVELAND	TWINSBURG
COIL WEIGHT	Maximum	70,000 lbs. (24"I.D.) 50,000 lbs. (20"I.D.)	74,000 lbs. (24" I.D.) 50,000 lbs. (20" I.D.)
TURNSTILE	Maximum	60,000 lbs.	60,000 lbs.

LENGTH OUTSIDE DIAMETER	Minimum Entry end:   Exit end:	350 feet   Minimum 36" Maximum 94"       Minimum 36" Maximum 82"	400 feet   Minimum 32" Maximum 96"       Minimum 36" Maximum 82"
INSIDE DIAMETER	Entry end:     Exit end:	Minimum 16" Maximum 33" – actual (at a min. of 25" wide)   20" or 24"	Minimum 20" Maximum 33" – actual (at a min. of 25" wide)   20" or 24"
	PICKLING CAPABILITIES:
MAXIMUM THICKNESS	.375" at 72" Nom Width .500" at 48" wide		.375" at 72" Nom Width .500" at 48" wide
MINIMUM THICKNESS	.054		.054
WIDTH REQUIREMENTS	Maximum 72" Inquire up to 73.750"   Minimum 18" Under 18" Please Inquire   SLITTER CAPABILITIES		Maximum 72" Inquire up to 74.500"   Minimum 18" Under 18" Please Inquire

                                        At 48", up to 3 widths at .500" @ 50,000 psi yield.

                                        At 72", up to 8 widths at .250" @ 50,000 psi yield.

 

SIDE SCRAP    Minimum: 1/2" per side or twice the thickness per side, whichever is greater

                            Maximum: 1-1/2" per side

 

SLIT WIDTH                Minimum                                         8"                                                      8"

SIDE TRIM WIDTH     Maximum                                      72"                                                    72"

                                                                                              18"                                                    18"

** Note: Unless otherwise specified by the customer, ½ of ASTM A568 will be utilized on all side trim and slitting orders.

 

OILS                                                                                     Metalub 4107A                                   Metalub 4107A

                                                                                              Daubert                                               Daubert

                                                                                              Quaker                                                Quaker

                                                                                              Vulcan 190                                          Vulcan 190

                                                                                                                                                           

 

 

COATINGS                                                                               N/A                                                   TRU-CHEM

                                                                                                                                                             1800-3 Dry Lube

                                                                                                                                                            

 

 

 

REWIND DIRECTION                                                     Over Rewind                                         Over Rewind

                                                                                                                                                            Under Rewind (24"I.D.)

 

THE ABOVE REPRESENTS OUR GENERAL SPECIFICATIONS ONLY.

PLEASE INQUIRE REGARDING PROCESSING OUTSIDE THESE SPECIFICATIONS.